User`s guide

12 Execution Modes
3 In the TLC options edit field, specify the o ption
-axpcCPUClockPoll=CPUClockRateMHz
TheassignmentoftheclockrateofthetargetPC’sCPUisnecessary
because the Pentium’s on-chip counter used for polling mode counts u p
with the CPU clock rate. If the clock rate is provided, the kernel can
convert clock ticks to seconds and vice versa. If an incorrect clock rate is
provided, the target application executes at an incorrect base sample tim
e.
You can find out about the CPU clock rate of the target PC by rebooting the
target PC and checking the screen output during BIOS execution time. The
BIOS usually displays the CPU clock rate in MHz right after the target PC
has been powered up.
For exam ple, if your target PC is a 1.2 GHz AMD Athlon, specif y the
following option in the TLC options edit field:
12-8