User`s guide

Web Browser Interface
4 Enter new values in the StopTime and SampleTime boxes, then click
the Apply button. You can enter
-1 or Inf in the StopTime box for an
infinite stop time.
The new property values are dow nlo aded to the target application. Note
that the SampleTime box is visible only when the target application is
stopped. You cannot change the sample time while a target application is
running. (See “User Interaction” in the xPC T arget Getting Started Guide
for limitations on changing sample times.)
5 Select scopes to view on the target PC. From the ViewMode list, select one
or all of the scopes to view.
Note The ViewMode control is visible in the xPC Target Properties pane
onlyifyouaddtwoormorescopestothetargetPC.
Changing WWW Properties
The WWW P ro pertie s cell in the l eft frame contains fields that affect the
display on the Web interface itself, and not the application. There are two
fields: maximum signal width to display and refresh interval .
1 In the Maxi mum Sign al Width bo x enter -1, Inf (all signals), 1 (show
only scalar signals),
2 (show scalar and vector signals less than or e qual to
2wide),or
n (show signals with a width less than or equal to n).
11-9