User`s guide

11 xPC Target™ Web Browser Interface
Command-
Line Option Description
-v
Verbose mode. Pro duces a line of output every time a
client connects or disconnects.
-n
Allows nonlocal connections. By default, only clients
from the same computer that the gateway is running
on are allow ed to connect. This option allows any body
to connect to the gateway.
If you do not use this option, only the host PC that is
connected to the target PC with a serial cable can connect
to the selected port. For example, if you start the gatewa y
on your host PC, with the default ports, you can type i n
the Web browser
http://localhost:2222. However, if
you try to connect to
http://Domainname.com:22222,
you will probably get a connection error.
-t tcpPort
Use TCP port tcpPort.Defaultt is 22222. For example,
to connect to port 20010, type
-t 20010.
-h
Print a help message.
-c comPort
Use COM port comPort (1 <= comPort <= 4). Default is
1. Forexample,touseCOM2,type
-c 2.
11-6