User`s guide

Web Browser Interface
5 In the DOS command window, press Ctrl+C.
The TCP/IP to RS-232 Gateway stops running, and the DOS command
window displays the message
interrupt received, shutting down
The gateway application has a handler that responds to Ctrl+C by
disconnecting and shutting down cleanly. In this case, Ctrl+C is not used
to abort the application.
6 In the MATLAB Command Window, type
xpc
The MATLAB interface reconnects to the target application and lists the
properties of the target object.
If you did not close the gateway application, the MATLAB window displays
the message
Error in ==>
C:\MATLABR13\toolbox\rtw\targets\xpc\xpc\@xpc\xpc.m
On line 31 ==> sync(xpcObj);
You must close the MATLAB interface and then restart it.
Syntax for the xpctcp2ser Command
The xpctc p2se r com m a nd s tarts th e TCP/IP to RS-232 gateway. T h e synt ax
for this command is
xpctcp2ser [-v] [-n] [-t tcpPort] [-c comPort]
xpctcp2ser -h
The options are described in the following table.
11-5