User`s guide

Target PC C ommand-Line Inter face
The target PC activates the command window.
2 Type a scope command. For example, to add a target scope (scope 2) in the
model
xpcosc,type
addscope 2
The xPC Target software adds another scope monitor to the target PC
screen. The command window displays a message to indicate that the new
scope has registered.
Scope: 2, created, type is target S0
3 Type a scope command. F or example, to add a signal (0) to the new scope,
type
addsignal 2=0
The command window displays a message to indicate that the new
parameter has registered.
Scope: 2, signal 0 added
You can add as man y signals as n ecessary to the sco pe .
4 Type a scope command. F or example, to start the scope 2,type
startscope 2
The target scope 2 starts and display s the signals you added in the previous
step.
Note If you a d d a target scope from the target PC, you need to start that scope
manually. If a target scope is in the model, starting the target application
starts that scope automatically.
Manipulating Scope Object Properties from the
Target PC
This section shows some of the common tasks that you use with target objects
and their properties.
8-5