User`s guide

Using Environment Properties and Functions
The Configuration node under the Target PC node has the target
PC-spe cific configuration pane. If your license does not include the xPC
Target Embedded Option product, you can choose Boot Floppy, CD Boot,
DOS Loader,orNetwork Boot. With the xPC Target Embedded Option
license, you have the additional choice of Standalone.
2 Change properties in the environment in the right pane by entering new
property values in the text boxes or choosing items from the lists.
xPC Target Explorer applies changes to the environment properties as soon
as you make them in the right pane.
To change environment properties for target PCs, see “Configuring
Environment Parameters for Target PCs” on page 6-5.
Configuring Environment Parameters for Target PCs
You can optionally configure the environment parameters for the target PC
node in your xPC Target system. This section assumes that
• You have already added target PC nodes to your system.
• You have already configured the communication parameters between the
host PC and the target PC.
Note In general, the default value s of these p arameters are sufficient for
youtousethexPCTargetsoftware.
1 In the xPC Target Explorer, expand a target PC node.
A
Configuration node appears. Under this are nodes for Communication,
Settings,andAppearanc e. The parameters for the target PC node are
grouped in these categories .
2 Select Settings.
The Settings Component pane appears to the right.
3 In the Target RAM size (MB) field, enter
6-5