User`s guide

Environment
5-5
SystemFontSize
Values are ’Small’ or ’Large’.
From the Setup window
SystemFontSize list,
choose either
Small, or Large.
The xPC Target GUIs use this information to
change the font size.
CANLibrary
Values are ’None’, ’200 ISA’, ’527 ISA’, ’1000
PCI’
, ’1000 MB PCI’, or ’PC104’.
From the Setup window
CANLibrary list, choose
None, 200 ISA, 527 ISA, 1000 PCI, 1000 MB PCI,
or
PC104.
HostTargetComm
Values are ’RS232’ or ’TcpIp’.
From the Setup window
HostTargetComm list,
choose either
RS232 or TCP/IP.
If you select
RS232, you also need to set the
property
RS232HostPort. If you select TCP/IP,
then you also need to set all properties that start
with
TcpIp.
RS232HostPort
Values are ’COM1’ or ’COM2’.
From the Setup window
RS232HostPort list,
choose either
COM1 or COM2 for the connection
on the host computer. xPC Target automatically
determines the COM port on the target PC.
Before you can choose an RS232 port, you need to
set the
HostTargetComm property to RS232.
RS232Baudrate
Values are ’115200’, ’57600’, ’38400’, ’19200’,
’9600’, ’4800’, ’2400’, or ’1200’.
From the
RS232Baudrate list, choose 115200,
57600, 38400, 19200, 9600, 4800, 2400, or 1200.
Table 5-1: List of Environment Properties
Environment
property
Description