User`s guide

5 Environment Reference
5-4
TargetRAMSizeMB
Values are ’Auto’ or ’MB of target RAM’.
From the Setup window
TargetRAMSizeMB list,
choose either
Auto or Manual. If you select
Manual, enter the amount of RAM, in megabytes,
installed on the target PC. This property is set by
default to
Auto.
TargetRAMSizeMB defines the total amount of
installed RAM in the target PC. This RAM is used
for the, kernel, target application, data logging,
and other functions that use the heap.
If
TargetRAMSizeMB is set to Auto, the target
application automatically determines the amount
of memory up to 64 MB. If the target PC does not
contain more than 64 MB of RAM, or you do not
want to use more then 64 MB, select
Auto. If the
target PC has more than 64 MB of RAM, and you
want to use more than 64 MB, select
Manual, and
enter the amount of RAM installed in the target
PC.
MaxModelSize
Values are ’1MB’, ’4MB’, or ’16MB’.
From the Setup window
MaxModelSize list,
choose either
1 MB, 4 MB, or 16 MB.
Choosing the maximum model size reserves the
specified amount of memory on the target PC for
the target application. The remaining memory is
used by the kernel and by the heap for data
logging.
Selecting too high a value leaves less memory for
data logging. Selecting too low a value does not
reserve enough memory for the target application
and creates an error.
Table 5-1: List of Environment Properties
Environment
property
Description