User`s guide

4 Embedded Option
4-10
The property TargetBoot can be set to two other values, namely DOSLoader
or
StandAlone. If the xPC Target loader is booted from any boot device with
DOS installed, the value
DOSLoader must be set as shown above. If you want
to use a stand-alone application that automatically starts execution of your
target application immediately after booting, specify
StandAlone.
After changing the property value, you need to update the xPC Target
environment by clicking the
Update button in the xPC Target Setup window.
If your choice is
DOSLoader, a new target boot disk must be created by clicking
BootDisk. Note that this overwrites the data on the inserted target boot disk
as new software modules are placed on the target boot disk. If your choice is
StandAlone, you click the Update button. Upon building your next real-time
application, all necessary xPC Target files are saved to a subdirectory below
your present working directory. This subdirectory is named with your model
name with the string
“_xpc_emb” appended. For example, xpcosc_xpc_emb.
For more detailed information about how to use the xPC Target Setup, see
Chapter 5, “Environment Reference.”