User`s guide

User Datagram Protocol (UDP)
3-25
Note that Port Data Types and Signal dimensions have been turned on from
the
Format menu, showing us that the width of the UDP packet to be sent is
75 bytes. The parameters used in the Pack block are Input port datatypes
{’uint8’,’int16’,’double’} and Byte Alignment 1.
For the Send block, set the
IP Address to send to to 192.168.0.2. This is the
hypothetical address of the system that will run Model B. Set the
IP Port to
send to
to 25000 (picked arbitrarily). The sample time is set to 0.01.
Use this information to construct the receive end of Model B.