User`s guide

3 Network Communication
3-8
7 In the MATLAB window, type
!c:\MATLABR12\toolbox\rtw\targets\xpc\xpc\bin\xpctcp2ser -h
Alternatively, you can open a DOS command window and enter
c:\MATLABR12\toolbox\rtw\targets\xpc\xpc\bin\xpctcp2ser -h
MATLAB displays the following
Usage:
xpctcp2ser [-v] [-n] [-t tcpPort] [-c comPort]
xpctcp2ser -h
The command line options are as follows:
-v : Verbose output.
-c comPort : Use Com Port comPort (1 <= comPort <= 4),
defaults to 1
-t tcpPort : Use TCP port # tcpPort, defaults to 22222
-h : Print a help message.
-n : Allow Non-local connections. By default,
only clients from the same computer that the
gateway is running on are allowed to connect.
This option allows anybody to connect to the
gateway.
Using the Main Page
The Main page is divided into four parts, one below the other. The four parts
are: System Status, xPC Target Properties, Navigation, and WWW Properties.
After you connect a Web browser to the target PC you can use the Main page
to control the target application.
1 In the left frame, click the Refresh button.
System status information in the top cell is uploaded from the target PC. If
the right frame is either the Signals List page or the Screen Shot page,
updating the left frame also updates the right frame.