User`s guide

xPC Target Scope Blocks
2-17
2 In the Scope Number box, enter a unique number to identify the scope.
This number is used to identify the xPC Target scope block and the scope
screen on the host or target computers.
3 From the Scope Type list, choose either Host or Target.
4 From the Scope Mode list, choose either Numerical, Graphical
(redraw), Graphical (sliding), or Graphical (rolling).
If you selected Host for the Scope Type, then you can only choose either
Numerical or Graphical (redraw) for the Scope Mode.
5 Select the Grid check box to display grid lines on the scope.