User`s guide

6 Target Object Reference

6-10

remscope

Removes a scope from the target PC. This method does

not remove the scope object, on the host PC, that

represent the scope.

getparamid

Returns the property name or index of a parameter

from the target object.

getsignalid

Returns the property name or index of a signal from the

target object.

getlog

Uploads and returns one of the data logs from the

target PC to the host PC. TimeLog, StateLog,

OutputLog, TETLog

reboot

Reboot the target PC. If a target application is running,

the target application is stopped, and then the target

PC is rebooted.

Close the serial connection to the target PC so that the

host PC can use the COMM port for another device.

Table 6-2: List of Target Object Methods

Method Description