User`s guide

Target Object
6-5
ExecTime
Execution Time. Time, seconds, since your
target application started running. When the
target application stops, the total execution
time is displayed.
SessionTime
Time since the kernel started running on your
target PC. This is also the elapsed time since
you booted the target PC. Values are in
seconds.
StopTime
Time when the target application stops
running. Values are in seconds. The original
value is set in the Simulink Simulation
Parameters dialog box.
When the
ExecutionTime reaches the
StopTime, the application stops running.
Yes
SampleTime
Time between samples. This value equals the
step size, in seconds, for updating the model
equations and post the outputs.
Yes
AvgTET
Average task execution time. This value is an
average of the measured CPU times, in
seconds, to run the model equations and post
outputs during each sample interval. Task
execution time is nearly constant with minor
deviations due to cache, memory access,
interrupt latency, and multirate model
execution.
MinTET
Minimum task execution time. Corresponds to
the fastest time (smallest time measured), in
seconds, to update model equations and post
outputs.
Table 6-1: List of Target Object Properties
Property Description Write