User`s guide

5 Environment Reference

5-18

NT systems, the status information is displayed only at the end of the write

process.

MathWorks, Inc.Read File:

C:\MATLAB\TOOLBOX\RTW\TARGETS\XPC\XPC\BIN\

..\..\target\kernel\xpcsgb1.rtd

Write Track 0- 9: ........uuuuuuuuuuuu

Write Track 10-19: uuuuuuuuuuuuuuuuuuuu

Write Track 20-29: uuuuuuuuuuuuuuuuuuuu

Write Track 30-39: uuuuuuuuuuuuuuuuuuuu

Write Track 40-49: uuuuuuuuuuuuuuuuuuuu

Write Track 50-59: uuuuuuuuuuuuuuuuuuuu

Write Track 60-69: uuuuuuuuuuuuuuuuuuuu

Write Track 70-79: uuuuuuuuuuuuuuuuuuuu

The process of creating a boot disk takes about 1 to 2 minutes.

4 Close the xPC Target Setup window.

5 Remove the target boot disk from the host PC disk drive. You may now use

this disk to boot your target PC.

To create a boot disk using the command line interface, see “Creating a Target

Boot Disk with Command Line Interface” on page 5-19.