Specifications

CAN driver blocks for the CAN-AC2 (ISA) with Philips PCA 82C200 CAN-Controller
4-9
Setup Driver Block
The Setup block is used to define general settings of the plugged-in CAN board.
Because the CAN driver blocks for this ISA board only support a single
physical board for each target system, this block has to be used exactly once
(one instance) in a model.
The dialog box of the Setup block lets you define the following settings.
CAN 1 - Baud rate — The first control (popup menu) lets you define the most
common baud rates for CAN port 1. If special timing is necessary (baud rate),
the value “User defined” can be selected. In this case the second control (edit
field) is used to provide the four values for the timing information. The vector
elements have the following meaning
[ Prescaler, Synchronisation-Jump-Width, Time-Segement-1,
Time-Segment-2 ]