Specifications

3 GPIB I/O Support
3-14
GPIB Simulink Block Reference
The GPIB-232CT-A is a GPIB controller external to the target PC. It is
connected to the target PC with an RS-232 cable.
xPC Target supports this controller with two driver blocks:
•GPIB-232CT-A Setup Block
•GPIB-232CT-A Send/Receive Block
Board Characteristics
GPIB-232CT-A Setup Block
The setup block parameters must be set to match the jumper settings on the
GPIB-232CT-A controller.
Driver Block Parameters
Board name GPIB-232CT-A
Manufacturer National Instruments
Bus type N/A
Access method RS232
Multiple block instance support No
Multiple board support Yes
Parameter Description
GPIB id Enter the identification number for the GPIB controller.
When the GPIB-232CT-A is turned on, the identification
number is set to
0.
Port From the list, choose
COM1, COM2, COM3, or COM4. This
is the serial connections the target PC uses to communicate
with the GPIB-232CT-A controller.