Specifications

16 Softing
16-14
Setup-block
Every SIMULINK-model which sends and receives CAN-messages over the
CAN-AC2-PCI board has to contain exactly one setup-block. The setup-block
does not have any inputs or ouputs.
The dialogue-box allows to define general settings for the CAN-AC2-PCI board.
The corresponding code (initializing the board) is executed once during the
"initializing blocks"-phase after the xPC Target application has been
downloaded.
The first and second dialogue-field allows to choose the baudrate of CAN-port
1. If the baudrate within the popup menu is not set to "user defined" the entries
in the "user-defined" dialogue-field have no meaning. If it is set to "user
defined" a wide range of baudrates can be set by setting Prescaler, Width,
Tseg1, Tseg2 to appropriate values. Contact the CAN-AC2-PCI manual for
detailed information how to set "user defined" baudrates.
With the third and fourth dialogue-field the baudrate for CAN-port 2 can be
set.