Specifications

CAN-AC2-ISA
16-5
2: D4000-D7FFF
3: D8000-D8FFF
The second and third dialogue-field allows to choose the baudrate of CAN-port
1. If the baudrate within the popup menu is not set to "user defined" the entries
in the "user-defined" dialogue-field have no meaning. If it is set to "user
defined" a wide range of baudrates can be set by setting Prescaler, Width,
Tseg1, Tseg2 to appropriate values. Contact the CAN-AC2 manual for detailed
information how to set "user defined" baudrates.
With the fourth and fifth dialogue-field the baudrate for CAN-port 2 can be set.
The last 4 dialogue-entries are used to define the Identifiers of all
CAN-messages sent or received within the current SIMULINK-model. There is
one dialogue-field for send- and receive-identifiers for CAN-port 1 and 2. Each
entry can contain a row vector with a maximal number of 200 identifiers. Each
identifier can be in the range of 0..2031. In a vector each identifier can only be
set once.