Specifications

15 Real Time Devices

Driver Block Parameters

Channel Vector - Enter numbers between 1 and 16. This driver allows the

selection of individual A/D channels in any order. The number of elements

defines the number of A/D channels used.

For example, to use the first, second and fifth channels, enter

[1,2,5]

Number the channels beginning with 1 even if the board manufacturer starts

numbering the channels with 0.

Range Vector - Enter a range code for each of the channels in the channel

vector. The range vector must be the same length as the channel vector. This

board allows the range of each channel to be different.

The following table is a list of the ranges for this driver and the corresponding

range codes.

For example, if the first channel is -10 to +10 volts, and the second channel is

0 to 10 volts, enter

[-10,10]

Gain Vector - Enter 1, 2, 4, 8, 16, or 32 for each of the channels in the channel

vector to choose the gain code of that channel. The gain vector must be the same

length as the channel vector. This driver allows the gain of each channel to be

different.

Input range (V) Range code Input range (V) Range code

-10 to +10 -10 0 - 10 10

-5 to +5 -5