Specifications

DM6814
21
DM6814
The DM6814 is a 16-bit counting board with 3 channels. This board typically
connects to incremental encoders. Incremental encoders convert physical
motion into electrical pulses than can be used to determine velocity, direction,
and distance.
xPC Target supports this board with one driver block:
•“DM6814 Incremental Encoder”
Note xPC Target does not support the 12 digital input lines on this board.
Board Characteristics
DM6814 Incremental Encoder
Driver Block Parameters
Encoder channel — From the list choose, 1, 2, or 3. This parameter specifies
which channel you use for this block. For the same board (same base address)
two blocks cannot have the same channel number.
Counter initial value
Enable counter reset on Px2
Board name DM6814
Manufacturer Real-Time Devices
Bus type ISA
Access method I/O mapped
Multiple block instance support Yes
Multiple board support Yes