Specifications

DM6604

Number the lines beginning with 1 even if the board manufacturer starts

numbering the lines with 0.

Port - From the list choose either A, B, or C. The port name defines which port

is used for this driver block. Each port has a maximum of 8 digital lines that

can be configured as inputs. In each case, one block is needed for each port.

Sampletime - Enter a base sample time or a multiple of the base sample time.

BaseAddress - Enter the base address of the board. This entry must

corresponds to the DIP-switch settings on the board. For example, if the base

address is 300 (hexadecimal), enter

0x300

DM6604 Digital Output

Channel Vector - Enter numbers between 1 and 8 to select the digital output

lines used with this port. This driver allows the selection of individual digital

output lines in any order. The number of elements defines the number of digital

lines used.

For example, to use all of the digital outputs for one port, enter

[1,2,3,4,5,6,7,8]