Specifications

15 Real Time Devices

[1,2,5]

Number the channels beginning with 1 even if the board manufacturer starts

numbering the channels with 0.

Range Vector - Enter a range code for each of the channels entered in the

channel vector. The range vector must be the same length as the channel

vector. This driver allows a different range for each channel.

The following table is a list of the ranges for this driver and the corresponding

range codes.

For example, if the first channel is -10 to + 10 volts and the second and fifth

channels are 0 to +5 volts, enter

[-10,5,5]

Sample Time - Enter the model base sample time or a multiple of the base

sample time.

BaseAddress - Enter the base address of the board. It is important that this

entry corresponds to the DIP-switch settings on the board. For example, if the

base address is 300 (hexadecimal), enter

0x300

DM6604 Digital Input

Channel Vector - Enter numbers between 1 and 8 to select the digital input

lines used with this port. This driver allows the selection of individual digital

input lines in any order. The number of elements defines the number of digital

lines used.

For example, to use all of the digital inputs for one port, enter

[1,2,3,4,5,6,7,8]

Input range (V) Range code Input range (V) Range code

-10 to +10 -10 0 - 10 10

-5 to +5 -5 0 - 5 5