Specifications

15 Real Time Devices
8
[0,0,1]
The driver selects a second differential input 8 channels higher than the first
channel. In the example above, the driver would select the thirteenth channel
as a differential input with the fifth channel.
Sample Time - Base sample time of a multiple of the base sample time.
BaseAddress - Enter the base address of the board. It is important that this
entry corresponds to the DIP-switch settings on the board. For example, if the
base address is 300 (hexadecimal), enter
0x300
DM6430 Analog Output (D/A)
Scaling Input to Output
Driver Block Parameters
This board has only 1 analog output (D/A) with a fixed range of -10 to +10 volts.
Sample Time - Base sample time of a multiple of the base sample time.
BaseAddress - Enter the base address of the board. It is important that this
entry corresponds to the DIP-switch settings on the board. For example, if the
base address is 300 (hexadecimal), enter
0x300
Hardware Output Block Input Data Type Scaling
volts double 1