Specifications

PCI-6071E
14-57
For example, if the first channel is -10 to + 10 volts and the second and fifth
channels are 0 to +1 volts, enter
[-10,1,1]
Coupling Vector - Enter a coupling code for each of the channels in the
channel vector. The coupling vector must be the same length as the channel
vector. This driver allows a different coupling for each channel.
The following table is a list of the couplings for this driver and the
corresponding coupling codes.
For example, if the first and second channels are single input and the fifth
channel is a differential input, enter
[0,0,2]
-0.1 to +0.1 -0.1 0 to +0.1 0.1
-0.05 to +0.05 -0.05
Coupling Coupling
Code
Description
RSE 0 Analog input line connected to the positive input
of the PGIA. Analog input ground (AIGND)
internally connected to the negative input of the
PGIA. See the board manual.
NRSE 1 Analog input line connected to the positive input
of the PGIA. Analog input sense (AISENSE)
connected to the negative input of the PGIA. See
the board manual.
DIFF 2 First analog input line connected to the positive
input of the PGIA. Second analog input line
connected to the negative input of the PGIA. See
the board manual.
Input range (V) Range code Input range (V) Range code