Specifications

PCI-6031E
14-45
[-10,1,1]
Coupling Vector - Enter a coupling code for each of the channels in the
channel vector. The coupling vector must be the same length as the channel
vector. This driver allows a different coupling for each channel.
The following table is a list of the couplings for this driver and the
corresponding coupling codes.
For example, if the first and second channels are single input and the fifth
channel is a differential input, enter
[0,0,2]
The driver selects a second differential input 8 channels higher than the first
channel. In the example above, the driver would select the thirteenth channel
as a differential input with the fifth channel.
Sampletime - Model base sample time or a multiple of the base sample time.
PCI Slot (-1:autosearch) - Enter a number between -1 and n.
If only one board of this type is physically present in your target PC, enter
-1
Coupling Coupling
Code
Description
RSE 0 Analog input line connected to the positive input
of the PGIA. Analog input ground (AIGND)
internally connected to the negative input of the
PGIA. See the board manual.
NRSE 1 Analog input line connected to the positive input
of the PGIA. Analog input sense (AISENSE)
connected to the negative input of the PGIA. See
the board manual.
DIFF 2 First analog input line connected to the positive
input of the PGIA. Second analog input line
connected to the negative input of the PGIA. See
the board manual.