Specifications

PC-TIO-10
14-25
Initial ARM State - From the list, choose Disarmed or Armed. The Initial
ARM State defines if the counter should be armed or disarmed after driver
initialization. The ARM State during a simulation can be controlled by the
second block input. If a value 0 is asserted, the counter is disarmed. If a value
1 is asserted, the counter gets armed.
Sample Time - Enter the base sample time or a multiple of the base sample
time. The sample time indicates the update rate of registration on the input
(Duty Cycle)
BaseAddress - Enter the base address of the board. This entry must
corresponds to the DIP-switch settings on the board. For example, if the base
address is 300 (hexadecimal), enter
0x300
The dialogue box of the block allows the following settings:
PC-TIO10 PWM Capture
PC-TIO10 FM Capture