Specifications

GPIB-232CT-A
14-13
Number of Stopbits - From the list, choose 1 or 2.
Parity - From the list, choose None, Odd, or Even.
Protocol - From the list, choose None or XOnXOff. If your serial device does
not support hardware handshaking, or your application softwarre requires
XOn/XOff handshaking, you might need to choose XOn/XOff.
Send Buffer Size - Enter the buffer size in bytes.
Receive Buffer Size - Enter the buffer size in bytes.
Initialization Struct - Enter the name of the structure containing the
initialization information. For example, enter
gpibinit
Termination Struct - Enter the name of the structure containing the
termination information.
GPIB-232CT-A Send/Receive
Driver Block Parameters
Port - From the list, choose COM1, COM2, COM3, or COM4. Serial connection
on the target PC to send and receive data
Message StructName - Enter the struct name that contains the messages to
be sent to the GPIB control and format information to receive data.
Sample Time - Enter a base sample time or a multiple of the base sample time.