Specifications

14 National Instruments
14-12
GPIB-232CT-A
The GPIB-232CT-A is GPIB controller external to the target PC. It is connected
to the target PC with an RS232 cable.
xPC Target supports this board with two driver blocks:
•“GPIB-232CT-A Setup”
•“GPIB-232CT-A Send/Receive”
Board Characteristics
GPIB-232CT-A Setup
The setup block parameters must be set to match the jumper seatings on the
GPIB-232CT-A.
Driver Block Parameters
GPIB id - Enter the identification number for the GPIB controller. When the
GPIB-232CT-A is turned on, the identification number is set to
0.
Port - From the list, choose COM1, COM2, COM3, or COM4. Serial connection
from the target PC to the GPIB-232CT-A controller
Baudrate - From the list, choose 115200, 57600, 38400, 19200, 9600, 4800,
2400, 1200, 600, or 300.
Number of Databits - From the list, choose 8 or 7.
Board name GPIB-232CT-A
Manufacturer National Instruments
Bus type N/A
Access method RS232
Multiple block instance support No
Multiple board support Yes