Specifications

AT-AO-6
14-7
AT-AO-6 Digital Output
The AT-AO-6 has 8 digital output lines.
Scaling Input to Output
Driver Block Parameters
Channel Vector - Enter numbers between 1 and 8 to select the digital output
lines. This driver allows the selection of individual digital output lines in any
order. The number of elements defines the number of digital lines used.
For example, to use all of the digital output lines, enter
[1,2,3,4,5,6,7,8]
Number the lines beginning with 1 even if the board manufacturer starts
numbering the lines with 0.
Sampletime - Enter a base sample time or a multiple of the base sample time.
BaseAddress - Enter the base address of the board. This entry must
corresponds to the DIP-switch settings on the board. For example, if the base
address is 300 (hexadecimal), enter
0x300
Hardware Output Block Input Data Type Scaling
TTL double < 0.5 = TTL low
>
0.5 = TTL high