Specifications

KPCI-1802HC
13-15
Coupling Vector - Enter a coupling code for each of the channels in the
channel vector. The coupling vector must be the same length as the channel
vector. This driver allows a different coupling for each channel.
The following table is a list of the couplings for this driver and the
corresponding coupling codes.
For example, if the first and second channels are single input and the fifth
channel is a differential input, enter
[0,0,1]
The driver selects a second differential input 32 channels higher than the first
channel. In the example above, the driver would select the 37th channel as a
differential input with the fifth channel.
Sampletime - Model base sample time or a multiple of the base sample time.
PCI Slot (-1:autosearch) - Enter a number between -1 and n.
If only one board of this type is physically present in your target PC, enter
-1
If two or more boards of this type are physically present in your target PC,
enter the PCI slot number of the board associated with this driver block.
Coupling Coupling
Code
Description
single-
ended
0 Analog input line connected to the positive
input. Analog input ground (IGND) internally
connected to the negative input.
differential 1 First analog input line connected to the
positive input of the PGIA. Second analog
input line connected to the negative input of
the PGIA. See the board manual.