Specifications

13 Keithley Metrabyte
13-6
Sample Time - Enter a base sample time or a multiple of the base sample
time.
BaseAddress - Enter the base address of the board. This entry must
corresponds to the DIP-switch settings on the board. For example, if the base
address is 300 (hexadecimal), enter
0x300
DAS-1800HR Digital Output
Scaling Input to Output
Driver Block Parameters
Number of Channels - Enter a number between 1 and 4 to select the number
of digital output lines used with this port.
Sample Time - Enter a base sample time or a multiple of the base sample
time.
BaseAddress - Enter the base address of the board. This entry must
corresponds to the DIP-switch settings on the board. For example, if the base
address is 300 (hexadecimal), enter
0x300
Hardware Output Block Input Data Type Scaling
TTL double < 0.5 = TTL low
>
0.5 = TTL high