Specifications

12 Humusoft
12-6
BaseAddress - Enter the base address of the board. This entry must
correspond to the DIP-switch settings on the board. For example, if the base
address is 300 (hexadecimal), enter
0x300
AD 512 Digital Input
Scaling Input to Output
Channel Vector - Enter a numbers between 1 and 8. This driver allows the
selection of individual digital line numbers in any order. The number of
elements defines the number of digital input lines used.
For example, to use the first, second and fifth digital input lines, enter
[1,2,5]
Number the lines beginning with 1, even if the board manufacturer starts
numbering the lines with 0.
Sample Time - Enter the base sample time or a multiple of the base sample
time.
BaseAddress - Enter the base address of the board. This entry must
correspond to the DIP-switch settings on the board. For example, if the base
address is 300 (hexadecimal), enter
0x300
Hardware Input Block Output Data Type Scaling
TTL double TTL low = 0.0
TTL high = 1.0