Specifications

Quartz-MM 5
10-15
Scaling Input to Output
Driver Block Parameters
Channel Vector- Enter a number between 1 and 8 to select the number of
digital input lines used.
Sample Time - Enter a base sample time or a multiple of the base sample
time.
BaseAddress - Enter the base address of the board. This entry must
correspond to the DIP-switch settings on the board. For example, if the base
address is 300 (hexadecimal), enter
0x300
Quartz-MM 5 Digital Output
Scaling Input to Output
Driver Block Parameters
Channel Vector- Enter a number between 1 and 8 to select the number of
digital output lines used.
Sample Time - Enter a base sample time or a multiple of the base sample
time.
BaseAddress - Enter the base address of the board. This entry must
correspond to the DIP-switch settings on the board. For example, if the base
address is 300 (hexadecimal), enter
Hardware Input Block Output Data Type Scaling
TTL double TTL low = 0.0
TTL high = 1.0
Hardware Output Block Input Data Type Scaling
TTL double < 0.5 = TTL low
>
0.5 = TTL high