Specifications

10 Diamond
10-10
MUX — From the list choose single-ended (32 channels) or differential
(16channels)
. This entry must correspond to the MUX jumpers set on the
board.
Sample Time - Enter the base sample time or a multiple of the base sample
time.
BaseAddress - Enter the base address of the board. This entry must
correspond to the DIP-switch settings on the board. For example, if the base
address is 300 (hexadecimal), enter
0x300
Diamond-MM-32 Analog Output (D/A)
Scaling Input to Output
Driver Block Parameters
Channel Vector — Enter numbers between 1 and 4. This driver allows the
selection of individual D/A channels in any order. The number of elements
defines the number of D/A channels you use. For example, to use the first and
second analog output (D/A) channels, enter
[1,2]
Number the channels beginning with 1 even if the board manufacturer starts
numbering the channels with
0
Range — From the list, choose a range code. This driver does not allows a
different range for each or the 4 channels. This selection has to correspond to
the range and bipolar/unipolar jumper settings on the board.
Hardware Output Block Input Data Type Scaling
volts double 1