Specifications

Diamond-MM-32
10-9
Diamond-MM-32 Analog Input (A/D)
Scaling Input to Output
Driver Block Parameters
First channel (1..n) — If you select single-ended from the MUX list, then
enter a number between 1 and 32 to select the first channel. If you select
differential from the MUX list, then enter a number between 1 and 16 to select
the first channel.
Number of Channels (1..n) — If you select
single-ended from the MUX list,
then enter a number between 1 and 32 to select the first channel. If you select
differential from the MUX list, then enter a number between 1 and 16 to select
the first channel. This driver does not allow the selection of individual channels
or a different MUX setting for each channel.
Range - From the list, choose a range code. This driver does not allow the
selection of a different range for each channel. The input range is the same for
all A/D channels.
The following table is a list of the ranges for this driver and the corresponding
range codes.
Hardware Input Block Output Data Type Scaling
volts double 1
Input range (V) Range code Input range (V) Range code
-10 to +10 -10 0 to +10 10
-5 to +5 -5 0 to +5 5
-2.5 to + 2.5 -2.5 0 to +2.5 2.5
-1.25 to +1.25 -1 0 to +1.25 1.25
-0.625 to
+0.625
-5