Specifications

PCI-DAS1602/12
9-127
PCI-DAS1602/12 Analog Output (D/A)
Scaling of Input to Output
Driver Block Parameters
Channel Vector - Enter Numbers between 1 and 2. This driver allows the
selection of individual D/A channels in any order. The number of elements
defines the number of D/A channels used. For example, to use the first and
second analog output (D/A) channels, enter
[1,2]
Number channels begin with 1 even if the board manufacturer starts
numbering channels with 0.
Range Vector - Enter a range code for each of the channels in the channel
vector. The range vector must be the same length as the channel vector. This
board allows the range of each channel to be different.
The following table is a list of the ranges for this driver and the corresponding
range codes.
For example, if the first channel is -10 to +10 volts, and the second channel is
0 to 5 volts, enter
[-10,5]
The range settings have to correspond to the DIP-switch settings on the board.
Also the Bipolar/ Unipolar jumpers have to be planted according to the ranges
used.
Hardware Output Block Input Data Type Scaling
volts double 1
Input range (V) Range code Input range (V) Range code
-10 to +10 -10 0 - 10 10
-5 to +5 -5 0 - 5 5