Specifications

9 ComputerBoards
9-122
to select the number of A/D channels used. This driver does not allow the
selection of individual channels or to mix single-ended and differential inputs.
Number the channels beginning with 1 even if the board manufacturer starts
numbering channels with 0.
Range - From the list, choose either +-10V (-10 volts to +10 volts), +-5V,
+-2.5V, +-1.25V, 0-10V, 0-5V, 0-2.5V, or 0-1.25V.This driver does not allow the
selection of different range for each channel.
MUX - From the list, choose either single-ended(16 channels) or
differential (8 channels). Your choice must correspond to the MUX-switch
setting on the board.
Sampletime - Enter the base sample time or a multiple of the base sample
time.
PCI Slot (-1:autosearch) - Enter a number between -1 and n.
If only one board of this type is physically present in the target PC, enter
-1
If two or more boards of this type are physically present in the target PC, enter
the PCI slot number of the board associated with this driver block.
PCI-DAS1200/JR Digital Input
The PCI-DAS1200/JR has one 8255 chip with 3 ports (A,B,C). Each port has a
maximum of 8 digital I/O lines that can be configured as inputs or outputs.
Use a separate diver block for each port. By selecting the digital input driver
block, the port is configured as input.