Specifications

PCI-DAS1200
9-117
differential is chosen from the MUX list, then enter a number between 1 and 8
to select the number of A/D channels used. This driver does not allow the
selection of individual channels or to mix single-ended and differential inputs.
Number the channels beginning with 1 even if the board manufacturer starts
numbering channels with 0.
Range - From the list, choose either +-10V (-10 volts to +10 volts), +-5V,
+-2.5V, +-1.25V, 0-10V, 0-5V, 0-2.5V, or 0-1.25V.This driver does not allow the
selection of different range for each channel.
MUX - From the list, choose either single-ended(16 channels) or
differential (8 channels). Your choice must correspond to the MUX-switch
setting on the board.
Sampletime - Enter the base sample time or a multiple of the base sample
time.
PCI Slot (-1:autosearch) - Enter a number between -1 and n.
If only one board of this type is physically present in the target PC, enter
-1
If two or more boards of this type are physically present in the target PC, enter
the PCI slot number of the board associated with this driver block.
PCI-DAS1200 Analog Output (D/A)
Scaling Input to Output
Driver Block Parameters
Channel Vector - Enter Numbers between 1 and 2. This driver allows the
selection of individual D/A channels in any order. The number of elements
defines the number of D/A channels used. For example, to use both of the
analog output channels, enter
[1,2]
Hardware Output Block Input Data Type Scaling
volts double 1