Specifications

9 ComputerBoards
9-104
PC104-DAS16JR/16 Digital Output
Scaling Input to Output
Driver Block Parameters
Number of Channels - Enter a number between 1 and 4 to select the number
of digital output lines used. This driver does not allow the selection of
individual digital output lines.
Sample Time - Enter the base sample time or a multiple of the base sample
time.
BaseAddress - Enter the base address of the board. It is important that this
entry corresponds to the DIP-switch settings on the board. For example, if the
base address is 300 (hexadecimal), enter
0x300
Hardware Output Block Input Data Type Scaling
TTL double < 0.5 = TTL low
>
0.5 = TTL high