Specifications

PC104-DAS16JR/16
9-103
PC104-DAS16JR/16 Digital Input
Scaling Input to Output
Driver Block Parameters
Number of Channels - Enter a number between 1 and 4 to select the number
of digital input lines used. This driver does not allow the selection of individual
digital input lines.
Sample Time - Enter the base sample time or a multiple of the base sample
time.
BaseAddress - Enter the base address of the board. It is important that this
entry corresponds to the DIP-switch settings on the board. For example, if the
base address is 300 (hexadecimal), enter
0x300
Hardware Input Block Output Data Type Scaling
TTL double TTL low = 0.0
TTL high = 1.0