Specifications

CIO-DDA06/16
9-65
Number the lines beginning with 1 even if the board manufacturer starts
numbering the lines with 0.
Port - From the list choose either A, B, or C. The I/O board has a 8255 chip
with 3 ports. The port name defines which port of the 8255 chip is used for this
driver block. Each port has a maximum or 8 digital lines that can be configured
as inputs or outputs depending on which driver block is chosen. In each case,
one block is needed for each port.
Sampletime - Enter a base sample time or a multiple of the base sample time.
BaseAddress - Enter the base address of the board. This entry must
corresponds to the DIP-switch settings on the board. For example, if the base
address is 300 (hexadecimal), enter
0x300