Specifications

CIO-DAS16/JR (/12)
9-35
From the list, choose either +-10V (-10 volts to +10 volts), +-5V, +-2.5V,
+-1.25V, +-0.625V, 0-10V, 0-5V, 0-2.5V, or 0-1.25V.This driver does not allow
the selection of different range for each channel.
Sampletime - Enter the base sample time or a multiple of the base sample
time.
BaseAddress - Enter the base address of the board. It is important that this
entry corresponds to the DIP-switch settings on the board. For example, if the
base address is 300 (hexadecimal), enter
0x300
Important: If this driver is used the input coupling switch on the CIO-DAS16Jr
has always to be in the 16 (single-ended) position.