Specifications

8 Burr-Brown
8-16
BaseAddress or Carrier Board (ie: 0xd000) - Enter the base address of the
board. This entry must corresponds to the DIP-switch settings on the board.
For example, if the base address is 300 (hexadecimal), enter
0x300
PCI-20098C Digital Output
Use a separate diver block for each port. By selecting the digital output driver
block, the port is configured as output.
Scaling Input to Output
Driver Block Parameters
Number of Channels - Enter a number between 1 and 8 to select the number
of digital output lines used with this port.
Number lines beginning with 1 even if the board manufacture starts
numbering lines with 0.
Port Number - From the list, choose either A or B to identify the port used
with this block of I/O lines.
Sample Time - Enter a base sample time or a multiple of the base sample
time.
BaseAddress or Carrier Board (ie: 0xd000) - Enter the base address of the
board. This entry must corresponds to the DIP-switch settings on the board.
For example, if the base address is 300 (hexadecimal), enter
0x300
Hardware Output Block Input Data Type Scaling
TTL double < 0.5 = TTL low
>
0.5 = TTL high