Specifications

PCI-20098
8-15
driver does not allow the selection of individual channels or a different MUX
setting for each channel.
Range - From the list, choose either +-10V (-10 to +10 volts), +-5V (-5 to +5
volts), or 0-10V.This driver does not allow the selection of a different range for
each channel. The input range is the same for all A/D channels
MUX (16/8) - From the list, choose either 16 single-ended or 8 differential.
This entry must correspond to the MUX-switch setting on the board.
Sample Time - Enter the base sample time or a multiple of the base sample
time.
BaseAddress or Carrier Board (ie: 0xd000) - Enter the base address of the
board. This entry must correspond to the DIP-switch settings on the board. For
example, if the base address is 300 (hexadecimal), enter
0x300
PCI-20098C Digital Input
Use a separate diver block for each port. By selecting the digital input driver
block, the port is configured as input.
Scaling Input to Output
Driver Block Parameters
Number of Channels - Enter a number between 1 and 8 to select the number
of digital input lines used with this port.
Port Number - From the list, choose either A or B to identify the port used
with this block of I/O lines.
Sample Time - Enter a base sample time or a multiple of the base sample
time.
Hardware Input Block Output Data Type Scaling
TTL Double TTL low = 0.0
TTL high = 1.0