Specifications

7 Advantech
7-38
BaseAddress - Enter the base address of the board. It is important that this
entry corresponds to the DIP-switch settings on the board. For example, if the
base address is 300 (hexadecimal), enter
0x300
PCL-818L Analog Output (D/A)
Scaling of Input to Output
Driver Block Parameter
Range - From the list, choose either 0-10V or 0-5V.
The range setting has to correspond to the DIP-switch settings on the board.
Sampletime - Base sample time of a multiple of the base sample time.
BaseAddress - Enter the base address of the board. It is important that this
entry corresponds to the DIP-switch settings on the board. For example, if the
base address is 300 (hexadecimal), enter
0x300
Hardware Output Block Input Data Type Scaling
volts double 1