Specifications

PCL-1800
7-7
PCL-1800 Digital Output
Scaling of Input to Output
Driver Block Parameters
Channel Vector - Enter numbers between 1 and 16. This driver allows the
selection of individual digital output lines in any order. The number of
elements defines the number of digital lines you use.
For example, to use the first 8 digital outputs, enter
[1,2,3,4,5,6,7,8]
Number the lines beginning with 1 even if the board manufacture starts
numbering the lines with 0.
Sampletime - Enter a base sample time or a multiple of the base sample time.
BaseAddress - Enter the base address of the board. This entry must
corresponds to the DIP-switch settings on the board. For example, if the base
address is 300 (hexadecimal), enter
0x300
Hardware Output Block Input Data Type Scaling
TTL double <0.5 = TTL low
>
0.5 = TTL high