Specifications

CAN FIFO Driver Blocks for the CAN-AC2-104 with Philips SJA1000 CAN-Controller
5-37
The dialog box of the block lets you define the following settings.
Board — The first control (popup menu) lets you define which physically
present board is accessed to reset the receive FIFO. For more information
about the meaning of the board number see the Setup driver block described
above. If just one board is present in the target system, board number 1 should
be selected.
Sample time — Defines the sample time at which the FIFO Reset RCV driver
block is executed during a model (target application) run.