Specifications

CAN FIFO driver blocks for the CAN-AC2-PCI with Philips SJA1000 CAN-Controller
5-17
CAN port — Defines the filter criterion for the CAN port. From the list, select
Any, 1, or 2.
Message type command — Defines the filter criterion for the event types. This
entry can consist of a concatenation of space delimited keywords which are:
SDF Standard data frame
SRF Standard remote frame
EDF Extended data frame
ERF Extended remote frame
EF Error frame
NE No new event
CBS Change of bus state
Message type selection mode — Defines how the event type (message type)
entered in the control above is treated. If you select
Include, the event type
criterion is the sum of the concatenated keywords. If you select
Exclude, the
event type criterion is equal to all event types minus the sum of the
concatenated keywords.
Identifier(s) — Defines the filter criterion for the CAN message identifiers. A
set of identifiers can be provided as a row vector.
Identifier selection mode — Defines how the identifier criterion entered in
the control above is treated. If you select Include, the identifier criterion is the