Specifications

CAN driver blocks for the CAN-AC2-104 (PC/104) with Philips SJA1000 CAN-Controller
4-37
Receive driver block
The Receive driver block is used to retrieve data from a CAN-network to be
used within a block model. You can use as many instances of the Receive block
in the model as needed. For example by using two instances of the block with
different sample times, CAN messages can be retrieved at different rates. Or
you can use multiple instances to structure your model more efficiently.
The dialog box of the block lets you define the following settings.
Board — The first control (popup menu) lets you define from which physically
present board the CAN messages defined by this block instance are retrieved
from. For more information about the meaning of the board number see the
Setup driver block described above. If just one board is present in the target
system, board number 1 should be selected.
CAN Port — The second control (popup menu) is used to select from which
CAN port, the CAN messages will be retrieved from.
CAN Identifier range — The third control (popup menu) is used to select the
identifier range of the CAN messages retrieved by this block instance. If an
application makes use of mixed Standard and Extended identifier ranges, at